DiSEqC (Switch)
Page 17
SAT
Switch
Motor
Back
DiSEqC
Switch
or
Motor
Use the function buttons to
select the DiSEqC required.
SAT
Back
DiSEqC Switch
Please select
Options
Dual Horn
SMATV Switch
4 Position Switch
Press
▲
or
▼
for required
DiSEqC and press
OK
to select
SAT
Back
DiSEqC 4 Position Switch
Please select
DiSEqC B
DiSEqC C
DiSEqC D
DiSEqC A
Press
▲
or
▼
for required
DiSEqC and press
OK
to select
After a short delay (of approximately 4 seconds)
you will be returned to Satellite Finding mode
with the DiSEqC command applied.
The Options selection enables you to send Tone Burst
commands (A or B).
The Dual Horn option is for use with dual feed LNB
assemblies enabling you to select the band and
polarisation available individually.
The SMATV switch option is for use with systems with
up to 16 inputs. Pressing
Back
will return you to the
DiSEqC menu.
The HD-STM features DiSEqC for controlling motors and
operating switches.
From the DiSEqC menu you can select Switch or Motor.
Pressing
SAT
or
Back
here will take you back to the last
satellite selected in the Satellite Finding Mode.
01/10/2010 10:30 AM
DiSEqC 4 Position Switch
Command Sent
DiSEqC A
Returning to Satellite mode.
The 4 Position Swich selection enables you to operate
DiSEqC switches up with up to 4 ports.
In this example we have chosen DiSEqC 4 Position switch,
and from here we can select A, B, C or D (Ports 1 to 4).
Pressing
Back
will return you to the menu above.
01/10/2010 10:30 AM
01/10/2010 10:30 AM
01/10/2010 10:30 AM
