Horizon Fitness Endurance 4-02, Руководство по обслуживанию

Страница: 6 / 14

6
CHAPTER 2: ENGINEERING MODE
2.2 Engineering Mode Overview
Mode Function Description
Eng 0
Display Test
START

LCD on
STOP

LCD off
Press each key to see if every one works.
Hold “STOP” 3 sec

back to “Engineering Menu”
Eng 1
Hardware Test
Press ENTER to scroll through the options in this menu and LEVEL UP
or DOWN to test or change the settings / components below.
RPM / HR windows shown – Pedal to test RPM, place hands on HR
grips to test heart rate.
ADC – Test the incline motor using the INCLINE UP or DOWN keys.
VER – Shows the software version of the MCB. Not Editable.
Hold STOP 3 sec

back to Engineering Menu
Eng 2
Switch Function
Use START to choose Speed Mode (MI = mile, KM = kilometer).
Use ENTER to choose Region (US or ID).
Use LEVEL up and down to switch EUP (Energy Saver) on or off.
Press LEVEL up and down for 3 seconds to enter ENG8 Mode or Hold
STOP 3 sec

back to Engineering Menu
Eng 3
Information
Accumulated Time and Distance
Hold “Stop” 3 sec

back to “Engineering Menu”
ENG8
When TEST is displayed in text box. Press ENTER to scroll to the next
option.
P0 = the software version will be shown in text box.
P1 = accelerated ratio (this is a factory only setting that should always
be set to normal).
P2 = virtual RPM (factory only setting).
P3 = clear all data by holding the START key for 5 sec.
P4 = burn time (factory only setting).

Press and hold the STOP key for 3 seconds to return to normal operation.