manualshive.com logo in svg

Horizon Fitness Elite T5, Руководство по обслуживанию

Поделиться
Скачать
Horizon Fitness Elite T5 Скачать руководство пользователя страница 25

 25 

 

                                                   

    

CHAPTER 4  Basic Machine Maintain

 

4.8 TENSIONING THE RUNNING BELT 

Running belt should NOT be moving during tensioning. Over tightening the running belt can cause ex-
cessive wear on the treadmill as well as its components. Never over-tighten the belt.  

If you can feel a slipping sensation when running on the treadmill, the running belt must be tightened. In 
most cases, the belt has stretched from use, causing the belt to slip. This is a normal and common ad-
justment. To eliminate this slipping, turn the treadmill off and tension both the rear roller bolts using the 
supplied Allen wrench, turning them . turn to the right (clockwise) as shown. Turn the treadmill on and 
check for slipping. Repeat if necessary, but never turn the roller bolts more than . turn at a time. Belt is 
properly tensioned when the slipping sensation is gone.

 

4.9 .CENTERING THE RUNNING BELT 

 

If the running belt is too far to the right side: Using the supplied Allen wrench and with the treadmill run-
ning at 1 mph turn the LEFT adjustment bolt counter-clockwise a . turn and wait for the belt to adjust it-
self.  

Use the motor cover marking or part line as a reference for alignment.  

Repeat if necessary, until the belt remains centered during use.  

If the running belt is too far to the left side: Using the supplied Allen wrench and with the treadmill running 
at 1 mph turn the LEFT adjustment bolt clockwise a . turn and wait for the belt to adjust itself.  

Use the motor cover marking or part line as a reference for alignment.  

Repeat if necessary, until the belt remains centered during use.  

▓

If you find the belt is slipping because it is too loose, center it then tension as needed.  

▓

For easier adjustment bolt access, remove the end caps.  

Содержание Elite T5

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды