Horizon Fitness AFC-566F, Руководство пользователя, Страница: 36 / 166

26
1-2-9 Set Up - Roller Gap Micro-Adjusting Screen
Each roller gap can be fine-tuned separately using this screen.
Roller Gap Micro -
Adjusting Screen
1-2 Touch Panel Description
23051
10208A1
The left
side below
the knife
The right
side below
the knife
The rear of the
parallel folding
area
Roller Gap
One sheet thickness x the number of sheets
Roller Gap Micro- Adjusting Value
Both/One Side Select Button
Press this to calibrate the thickness of
one sheet. The gaps will not actually
change until you return to the Roller Gap
screen and press the Adjusting Start
button.
Sheet thickness which is inserted in the
sheet thickness detector (page 9) is
displayed here. When changing to the
different sheets or the sheet thickness
has been changed by adjusting knob,
press the Thickness Calibration button to
update the displayed value. To reflect this
value to the roller gap,
press on the Roller Gap screen.
These select the
rollers to be
adjusted. Press this button to
return to the Roller
Gap screen.
Thickness Zero- Point Adjusting Button
Press this button without a sheet on the
sheet thickness detector.
The zero-point will be reset.
Roller Number
Return Button Roller Select Button
Each roller gap is
measured by the
number of sheets
Thickness Measuring Button
: Adjust only one side
: Adjust both sides at once
You can also
select the roller to
be adjusted
directly.
300
m
m
300
m
m
80
80 1 1
0
80
0
The front of the
parallel
folding
area
Example: The roller gap is 295 m.
Example: The roller gap is 305 m.
Roller Gap Micro- Adjusting Button
Minimum adjusting value 5 m
-5
+5
Thickness of One Sheet
Setting the Value for the Roller Gap
Case of roller gap