horiba ABX MICROS ES60, Руководство пользователя

Страница: 153 / 200

Maintenance & Troubleshooting
User Manual - RAB237AEN 7–5
3. Maintenance procedures
3.1. General cleaning of the instrument
Instrument external cleaning
◆
The external surfaces of the instrument must be decontaminated considering the biological
environment.
All contaminated surfaces
◆
Slightly wet a sponge with disinfectant product* and wipe the dirty surfaces.
Stainless steel
◆
Slightly wet a sponge with disinfectant product* and wipe the dirty surfaces. Dry with a soft cloth.
* Products having the following microbiological properties:
- Bactericidal
- Fungicidal
- Active on Aspergillus fumigatus
- Active on Mycobacterium tuberculosis (B.K)
- Antiviral (VIH, HBV and rotavirus)
Product example validated by HORIBA ABX:
ANIOS detergent disinfectant; WIP
'
ANIOS; ref: 1316.424
Instrument internal cleaning
Concentrated cleaning
◆
Counting chambers and hydraulics parts are decontaminated by using the " Concentrated
cleaning " function (See 3.3.5. Concentrated cleaning, page 7-9 ).
Sampling needle
◆
Sampling needle must be decontaminated as follows:
1- Prepare a solution of sodium hypochlorite to 100ml/L.
2- Fill a 5ml tube with this solution.
3- Run 5 analyses on bleach.
◆
Never spill liquids on the instrument.
◆
Never use disinfectant product that contains alcohol.
◆
Never use solvants or abrasive materials.
◆
Wipe off any trace of blood spillage as soon as possible.
◆
Always disconnect the main electrical supply before cleaning the exterior of
the analyser.
◆
Make sure that the instrument is completely dry before re-connecting the
electrical power.
Please also refer to the W.H.O (World Health Organization) guidelines:
"Laboratory Biosafety Manual, 2nd edition", for further information.
Please also refer to the W.H.O (World Health Organization) guidelines:
"Laboratory Biosafety Manual, 2nd edition", for further information.