HORI Mario Cart Pro Mini, Инструкция по эксплуатации

Страница: 7 / 54

・ If you do not perform step ② after ①, the Program LED (Right) will turn off after four seconds and button assignment mode will
automatically end.
・
During steps 2
〜
6, only the steering unit and foot pedal input are enabled.
Button input from the controller to the Nintendo Switch™ will be disabled.
・ Controller settings are stored even if the USB is disconnected.
Gradual (Steady steering) Responsive (Easy to turn) Default
1 2 3 5 6
LED colour
4 7
Green Yellow Red Purple Blue Light Blue White
7
Press for 3 seconds
Press
Press
Press
Press
Set Control Toggle
Switch to DP
■ Adjustable Dead Zone
The Dead Zone is adjustable to seven levels.
Program LED (Left) colour will change to indicate the dead zone value.
④
Dead zone value increases by pressing up on the Directional Pad.
Wide
⑤
Dead zone value decreases by pressing down on the Directional Pad.
Narrow
②
Program LED (Right)
will flash (quickly).
③
Left Program LED colour will
change according to setting
and chart below.
①
Program LED (Right)
will flash (slowly).
⑥
Program LED (Left)
will turn off.
Program LED (Right)
will turn off.
(The Program LED (Right) will light green when assigning buttons.)
Narrow Wide Default
1 2 3 5 6
LED
4 7
Green Yellow Red Purple Blue Light Blue White
・
If you do not perform step ② after ①, the Program LED (Right) will turn off after four seconds and button assignment mode will
automatically end.
・ During steps 2 〜 6, only the steering unit and foot pedal input are enabled.
Button input from the controller to the Nintendo Switch™ will be disabled.
・ Controller settings are stored even if the USB is disconnected.