14
Note：
When the switch connected workstations, servers, routers or
other ethernet devices the cable length should be within 100
meters;
The Auto-MDI / MDIX ethernet interface is enabled by default.
Category 5,the standard network cable or crossover cable can be
used for Ethernet connection.
Do not connect the RJ45 port to the phone line
2.2 SFP Port connection
PS3016S SFP port only support Gigabit fiber module.
Recommended use of standard SFP module products
The process of installing a fiber module on a switch is as follows:
1、 grasp the optic fiber module from the side, insert it
smoothly along the SFP port slot until the optic fiber module and
switch are in close contact;