Hoppecke Xchange MU, Оригинальное руководство по эксплуатации

Страница: 7 / 12

Operation Manual_MU_HPL_En 7
3.2 Unloading batteries from the MU
Discharge the battery from the MU in the same way but in the reverse order.
• To remove the battery from the unit, place the front surface of the battery on a rack or
a truck, checking the heights of the rollers and the bottom of the battery (they must be
at the same level), and checking the alignment of the sides of the battery before
performing the transfer.
• Slide the battery safety latch (B) to the lower position to allow the battery to pass over
it.
• Unlock the lock latch (D) of the transport truck (C) - it must be raised.
• Use the crank (A) to start moving the battery from the truck compartment.
• Once the battery is in a safe position, remove the bracket (E) from the battery, taking
care not to touch the terminals. Then, using the crank (A), move the truck to the initial
position.
Upon completion of the battery replacement process, return the unit to the assigned safe
storage location and document its use as required.