HMC
(
HOPF
M
ANAGEMENT
C
ONSOLE
)
SOFTWARE
12 / 76
8024GPS - GPS Sync Module - V02.00
hopf
Elektronik GmbH
Nottebohmstr. 41
• D-58511 Lüdenscheid • Tel.: +49 (0)2351 9386-86 • Fax: +49 (0)2351 9386-93 • Internet: http://www.hopf.com • E-Mail: [email protected]
3.3.1 The Menu - Area A
Submenu File
o
Exit
: Closes the
hmc
software. In case there are changes not yet transmitted, or
devices in a special state, a confirmation dialog is shown before closing.
Sub Menu Devices
o
New
: Integrate a new device. See Opening a device.
o
Remove
: Removes the selected device from the device tree. In case there are
changes not yet transmitted, or devices in a special state, a confirmation dialog is
shown before removal.
o
Restore Connections
: Restore all devices which have been connected after the last
program termination. After program start no device is connected automatically.
o
Connect
: Connect to the unconnected device selected in the device tree.
o
Disconnect
: Close the connection to the connected device selected in the device
tree. In case there are changes not yet transmitted, or devices in a special state, a
confirmation dialog is shown before disconnecting.
o
Driver Management
: Opens the driver management dialog, which shows details
about installed drivers and allows the addition of new drivers. See Driver
Management.
Sub Menu Tools
o
View DCF77 Record
: allows opening a DCF77 reception data record file from the file
system.
o
Network configuration assistant
: opens the Network Configuration Assistant. See
Network Configuration Assistant.
o
NTP Analysis: opens the NTP Analysis dialog
.
o
View GPS Record
: opens the GPS Record dialog.
o
Verbose Logging
: Enables/Disables verbose logging for detailed diagnosis. Should
be enabled only in error situations.
Sub Menu Help
o
Info
: Opens the Info Dialog, which shows the
hmc
software version number, as well
as contact information.
