I
MPLEMENTATION OF THE
B
OARD
7406RC
IN THE
S
YSTEM
7001RC
7406RC Slave Clock Control Board for System 7001RC - V02.03
15 / 27
hopf
Elektronik GmbH
Nottebohmstr. 41 • D-58511 Lüdenscheid • Tel.: +49 (0)2351 9386-86 • Fax: +49 (0)2351 9386-93 • Internet: http://www.hopf.com • E-Mail: [email protected]
5.4
Parametrize / Activating the Board 7406RC in the
System 7001RC
The following steps are required to activate the board:
To avoid undesirable output behaviour of the board it is first parameterized
and then activated by switching it into the monitoring system.
In
the
BOARD-SETUP
menu, sub-heading
ADD SYSTEM-BOARDS
, log on the
newly installed board.
In
the
BOARD-SETUP
menu, sub-heading
SET SYSTEM BOARDS PARAMETER
parameterize the board. (
Chapter 6 Administration of the Board 7406RC
)
In
the
BOARD-SETUP
menu, sub-heading
SET SYSTEM BOARDS TO
MONITORING-MODE OR IDLE-MODE
integrate the newly installed board into the
monitoring system.
The menus:
ADD SYSTEM-BOARDS
and
SET SYSTEM BOARDS TO MONITORING-MODE OR IDLE-
MODE
can be consulted in the technical specification of the system 7001RC.
