5
Adjusting the Screen Image
Use the buttons on the rear control panel to display and adjust the On-Screen Display (OSD) con-
trols which display on the screen. Do the following to adjust the screen image:
1. To display the Main Menu, press button [1].
NOTE:
All OSD menus and adjustment screens disappear automatically after about 15
seconds.
2. To select a control you want to adjust, press
▲
or
▼
to scroll up or down the Main Menu.
3. After the control is selected, press button [2]. A control screen like the one shown below
appears.
4. To adjust the control, press the up
▲
or
▼
buttons.
5. To save the adjustments and exit the menu, press button [1] twice
The following tips may help you optimize your display:
o
Adjust your computer's graphic card so that it outputs a video signal 1280 x 1024 @ 60 Hz
to the LCD display. (Look for instructions on "changing the refresh rate" in your graphic
card's user guide.)
o
If necessary, make small adjustments using H POSITION and V POSITION until the screen
image is completely visible. (The black border around the edge of the screen should barely
touch the illuminated "active area" of the LCD display.)