Hope Industrial Systems HIS-RL19C Скачать руководство пользователя страница 3

Safety and Regulatory Information 

 

Warning 

 

To prevent fire or shock hazard, do not expose the unit to rain or moisture. Dangerously 
high voltages are present inside the unit. Do not disassemble the unit. Refer servicing to 
qualified personnel only. 
 
This equipment is not intended for use in critical applications where its failure to operate 
would create immediate life threatening circumstances.  Applications including, but not 
limited to, nuclear reactor control, aerospace navigation systems and life support systems 
are not appropriate for this product. 
 
This product is a UL Recognized Component and must be used with a listed computer.

 

 

FCC Notice 

 

This equipment has been tested and found to comply with the limits for a Class A digital device, 
pursuant to Part 15 of the FCC Rules.  These limits are designed to provide reasonable protection 
against harmful interference when the equipment is operated in a commercial environment.  This 
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used 
in accordance with the instruction manual, may cause harmful interference to radio communica-
tions.  Operation of this equipment in a residential area is likely to cause harmful interference in 
which case the user will be required to correct the interference at his own expense.  Any changes 
or modifications not expressly approved by the grantee of this device could void the user’s authori-
ty to operate the device.  
  

Содержание HIS-RL19C





















Отзывы: