Hoover WindTunnel S3630 Скачать руководство пользователя страница 13

Страница: 13 / 14

Problem: Cleaner won’t run

Problem: Cleaner suction low

Problem: Power nozzle agitator

brush roll won’t run

Problem: Nozzle won’t pick up

Possible cause

Possible solution

• Not firmly plugged in.

• Plug unit in firmly.

• No voltage in wall plug.

• Check fuse or breaker.

• Blown fuse or tripped breaker.

•Replace fuse/reset breaker.

Possible cause

Possible solution

• Hose power cord not firmly plugged

in.

• Plug firmly into receptacle on

cleaner base.

• Broken or worn belt.

• Replace belt.

• Floor surface set to BARE.

• Set floor surface to RUG.

Possible cause

Possible solution

• Low cleaner suction.

• See section “Cleaner suction low”.

• Blockage in nozzle connector.

• Remove blockage

• Agitator brush roll not running.

• See section “Agitator brush roll won’t

run”

• Agitator brush roll brushes worn.

•Replace brushes.

Possible cause

Possible solution

• Bag full.

•Replace paper bag.

•Blockage in nozzle connector,

hose or wands.

• Remove blockage.

• Secondary filter dirty.

• Clean filter.

• Bag not opened.

• Open bag by pulling folds.

•Hose not properly connected to

cleaner

•Ensure hose is properly connected.

4. If you have a

problem

If a minor problem occurs, it usually

can be solved quite easily when the

cause is found by using the check

list below.

nector and remove any blockage.

Familiarize yourself with these home

maintenance tasks as proper use

and care of your cleaner will ensure

continued cleaning effectiveness.

4. Make sure power nozzle plug is

disconnected from hand grip. Then

2. Plug cleaner in, turn on, and

check hose end for suction. Remove

any obstructions.

3. Remove power nozzle from

wands and attach wands to hose.

Check for suction and remove any

blockages.

4-1

4-2

check for blockage in nozzle connec-

tor (A).

Push nozzle connector down to low-

est position. Look into nozzle con-

Problem: Powered hand tool

brush roll won’t turn

Possible cause

Possible solution

• Too much pressure being applied to

tool.

• Continue using tool applying light

pressure.

• Blockage in turbine channel.

• Remove blockage

• Broken or worn belt.

• Replace belt.

• Low cleaner suction.

• Check items under “Cleaner suction

low”.

4-3

5. Disconnect powered hand tool

(some models) from hose. Remove

bottom plate, belt guard and turbine

as described in Figs. 3-21, 3-22 and

3-29.

Remove any blockage from turbine

channel (B).

Replace belt, turbine, brush roll, belt

guard and bottom plate.

Continued

ﬂ

Содержание WindTunnel S3630















Результаты поиска

Содержание WindTunnel S3630

Отзывы:

Бренды по названию

Популярные бренды

Hoover WindTunnel S3630, Руководство пользователя

Результаты поиска

Содержание WindTunnel S3630

Отзывы:

Бренды по названию

Популярные бренды