Handle position
For ease in turning knob, place handle
in the upright position (C).
The nozzle will not move into the
adjusted position until the cleaner
handle is lowered to the operating
position (D).
Settings
For maximum cleaning performance,
the following carpet height settings are
recommended.
• Lowest setting:
for low pile carpet and
hard floors.
• Medium setting:
recommended for most
types of carpet.
• High setting:
for deeper pile carpet
where easier pushing effort is desired,
while maintaining good cleaning perfor-
mance.
Note: If the cleaner is difficult to push,
turn knob to the high setting.
6
Carpet height
adjustment
The cleaning of carpet and rugs takes
place at the nozzle (A).
When it is necessary to raise and lower the
nozzle for various carpet pile heights, turn
the nozzle control knob (B) to the desired
setting.
Carrying handle
Use the carrying handle, located on the
back of the cleaner, to lift the cleaner.
Handle positions
The handle of your cleaner has three
positions;
upright
for storage and when
using cleaning tools;
operating posi-
tion
for general operation on carpet
and floors;
low
for reaching under low
furniture. Step on handle release lever
to lower handle.
Transporting cleaner
Put handle in upright position. Tilt
cleaner back on rear wheels. Push
forward.
2-4
2-5
2-6
2-7
2-8
2-9
B
D
C
A
