4
Assembly
Push screw into hole and tighten securely with a Phillips screw
driver (Fig 10).
With front of deep cleaner resting on floor, place 2 projections
on lower hose holder into 2 holes on back of cleaner (Fig 9).
10
9
TRIGGER
11
NOZZLE CONNECTOR
END OF HOSE
SOLUTION
HOSE
CONVERTER
END OF HOSE
Stretch hose out and identify ends.
Note:
You may find it helpful when storing the hose and nozzle
to refer to the
information on the back of the deep cleaner
and on the converter end of the hose
(Fig. 11).
8
Press cord into cord clip on back of handle.
Pull cord tightn (Fig. 8).
Attach lower hose holder
Storing hose and nozzle on rack
13
Secure hose to rack at numbered locations as shown.
(Fig. 13)
To store hose on rack, begin by placing
nozzle connector end
of hose (straight end)
into
clip 1
on rack (Fig. 12).
HANDLE
CORD
HOOK
12
CLIP 1
CLIP 1
14
1
2
4
3
2
2
Converter is stored in area as
shown.
NOZZLE
CONNECTOR
HOLES
HOSE
HOLDER
PROJECTIONS
While aligning arrows (Fig. 14), place extension into bottom of
converter opening; then push converter firmly against deep
cleaner until it snaps into place.
To remove, first pull top of converter off extension then pull off
bottom.
Secure solution hose to converter as shown.
HOOK
EXTENSION
