Attach tool holder
Remove tool and taped screw from rack.
Insert projections on rack into slots on
back of cleaner.
Slide rack down into place. Insert screw
Storing hose tools
at (D) and tighten with a Phillips screw-
driver,
Store hose on holder by first positioning
hose in front section of holder.
Continue wrapping hose over upper
Position tool in holder at base of cleaner
and snap into place as snown at
arrow.
Insert end of bare floor attachment into
holder and snap into clip as shown.
hose hook (E) and under lower hook (F).
Snap hose end
fully
into holder (G).
Ensure that the hose end is pushed
down completely into holder (G).
The powered hand tool is shipped in a
plastic bag for protection. Remove the
bag before using the tool by first open-
ing tool door.
To remove tool, pull it down and out-
ward.
To reposition the tool, reverse this proce-
dure.
How to reattach tool
cover
The tool cover is designed with a break-
away feature which allows it to snap free
if it is pushed open too far.
To reattach, align hinges of cover with
slots on sides of tool storage area.
Push cover down to secure in place.
5
