Using your machine:
1
Press the
steam wand
release pedal and
pull the steam
wand and
handheld out
of the floorhead.
2
Use the arrows to
align the concentra-
tion nozzle to the end
of the steam wand.
Push the concen-
tration tool onto the
steam wand and
twist clockwise to
lock into position.
3
Plug the steamer into
mains and slide the
On/Off switch to On.
The green light will
illuminate when it is
ready to use. The
steamer will automati-
cally set to Max steam
(no solution).
5
To produce steam
squeeze the trigger
in short bursts.
Don’t hold the
trigger continuous-
ly to prevent
soaking.
4
Press the centre
pad on the control
panel to select
preferred setting
steam/solution.
Using the steam reach wand
2. ROT
ATE
1. PUSH
16
WARNING
Always switch off the steamer and allow steamer to cool before attaching/detaching the steam
wand, floorhead, accessories and twin tank.Always stand steamer securely against a wall/fixed
structure or lie the steamer flat on the floor in a suitable location so it does
not become a trip hazard or can be stepped on.
When using the steam reach wand do not aim towards electrical components such as light
fittings, sockets and wiring.
!
!
see next page
