Hoover Nextra Скачать руководство пользователя страница 2

           

 

 

 

2004

 

Figura 3 

 
C) TROUBLESHOOTING AND DISPLAYING OF THE ERROR CODES: 
 
All Washing Machines belonging to the new 
Hoover "Nextra" range, are supplied with a 
peculiar software, capable of recognizing and 
displaying the Error Codes corresponding to the 
most important troubles that may happen, both 
during the normal Washing Cycle than during the 
carrying out of the Auto-test routine. 
 
Each time a serious trouble happens, the related 
Error Code is stored into the EEprom memory, the 
currently running washing cycle (or Auto-test) is 
halted and the same Error Code is displayed. This 
is a valid help to the Service Technician, in order 
to make easier the identification of the reason of 
the trouble. 
 
The Error Codes are displayed by making flash simultaneously the START LED and the LED 
OF THE 1

st

 OPTION'S BUTTON (see Picture 3). 

 
The length of each displaying of an Error Code is 15 seconds. During this period of time, both 
LEDs flash together at the frequency of 1 Hz (1 flash per second), the number of their flashes 
in the 15 seconds period being the actual Error Code. After the Code was displayed, both 
LEDs stay OFF until the end of the 15 seconds period. Then, the sequence is repeated. 
 
Example:   Error Code n. 2 (missing completion of the water load, within the designed limit 

time) is so displayed: 

 

  2 flashes by the 2 LEDs together, in the 1

st

 2 seconds (0.5" ON – 0.5" OFF). 

  13 seconds both LEDs are switched off. 

  The sequence as above is repeated.  

 
 

D)  LIST OF THE PRESENTLY AVAILABLE ERROR CODES: 

 

Error 

Code 

Number of 

Flashes by  

2 LEDs 

Time the 

2 LEDs 

stay OFF 

Possible reason of the Error Warning: 

Error   1 

14 

Door Lock Safety Device open circuit and/or Wiring. 

Error   2 

13 

Missing completion of the Water Load Phase, within 
the designed limit time of 5 minutes and 18 seconds, 
due to Low Hydraulic Pressure, faulty Solenoid Valve 
and/or clogged Fill Hose. 

Error   3 

12 

Missing completion of the Water Drain Phase, within 
the designed limit time of 6 minutes, due to clogged 
Pump's Filter and /or clogged Drain Hose or clogged 
domestic drain system. 

Отзывы: