PROGRAMME SELECTION
AND SPECIAL FUNCTIONS
When you have selected the desired
programme and any option buttons, the
information you have selected will appear
on the display.
When programmes and option buttons are
compatible a bleeping sound will be heard
and the LED above the option button
selected remain illuminated.
If you select an option button that is not
compatible with the programme you
require, the LED above the button will not
switch on and "NOT AVAILABLE" will be
displayed.
To deselect an option button, press it
again.
Carefully read the relevant descriptions
detailed below.
Programme settings
■
Open the door and place dirty dishes
inside the appliance.
■
Press the "ON/OFF" button .
■
After pressing the "ON/OFF" button,
the LED for the factory set is
"recommended”
(which is ideal for full
load daily use) or the LED for the Auto’
Memory program (see below) will blink.
The left section of the display will be
show the length of the programme
alternating hours with minutes
(I.e.: 1 h = 1 hour / 40 = 40 minutes).
The middle section of the display will be
show the programme selected and, after
it has started, the programme phase.
The right section of the display will be
show the maximum temperature of
selected programme.
Example:
"Recommended”
programme
(factory setting)
IMPORTANT
The dishwasher has two very useful
functions:
- the "recommended" programme
( ) for quick and safe selection;
- the "Auto’ Memory", function
which memorises a programme
used at least 3 times consecutively
so that if you regularly use the same
washing cycle you do not have to
keep setting the programme each
time, thereby saving time and effort.
■
To choose an option, press the
corresponding button (the LED will
switch on). The selected option will be
displayed (if you choose more than one
option at the same time, they will be
displayed one after the other).
Option buttons must be pressed
BEFORE starting the programme to
get them be accepted.
■
To choose another programme, press
the corresponding button (the relevant
LED will flash confirming the selection).
91
AUTO PROG.
UNIVERSAL
1h
65
11:05
PREWASH
40
65
Length of programme/
Time remaining
Maximum
temperature
90
EN 50242 place load
Capacity with pans and dishes
Water supply pressure
Fuse
Power input
Supply voltage
15
9 persons
Min. 0,08 - Max 0,8 MPa
(see rating plate)
(see rating plate)
(see rating plate)
DESCRIPTION OF THE CONTROL PANEL
TECHNICAL DATA:
DIMENSIONS:
Height
Depth
Width
Depth with door open
cm
cm
cm
cm
with working top
85
60
60
120
without working top
82
57,3
59,8
117
A
"ON/OFF" button
B
"ECO" button
C
"POWER" button
D
"1/2 FLEXI" button
E
“MENU” button/
"DELAY START" button
F
Open door
G
"PROGRAMMES" buttons
H
"OPTION SELECTION" LEDs
I
DIGITAL DISPLAY
L
"PROGRAM SELECTION" LEDs
F
G
L
A
B C D E
H
I
