12
After Sales Support
(AU) 1300 886 649 (NZ) 0800 836 761 | tempo.org/support
Instructions
Control panel buttons
(Fig. 4)
1 Program dial
: Turn the program dial (knob) clockwise or anticlockwise to switch on the
appliance and select the required program (see page 16
for details of the programs).
2 Off position:
At the end of a program, turn the knob to the Off position to switch the
machine off.
3 Duration button:
Press this button to extend the drying time. The “Gentle - Light”
program has a default drying time of 20 minutes, which can be extended in 10 minute
steps.
4 Child lock:
–
To activate the child lock after the drying cycle has started, press and hold the
Duration
and
Dry Level
buttons for several seconds. When the child lock
icon lights up on
the display, all buttons and knob operations are ineffective except for the Off position.
(In an emergency you can still power the machine off.)
– To cancel the lock, press and hold the
Duration
and
Dry Level
buttons for several
seconds.
– The function will be cancelled when you open the door or take out the filter drawer
during operation, or when the water container is full and needs to be emptied.
5 Dry Level button:
If the program allows, use this button to select the drying level.
6 Anti-Crease button:
Use this button to extend the duration of the anti-crease phase.
7 Mute buzzer:
Press and hold the
Anti-Crease
and
Delay Start
buttons for three to
five seconds to mute the buzzer.
8 Delay Start:
Use this button to set the delay time (from 1 to 24 hours) of the start of a
drying program.
9 Start/Pause
button:
Press this button to start a drying program or to
pause it.
10 Display screen:
Shows the settings, time remaining, options, codes, etc. (see page 13).
3
1
5
4
8
6
7
9
10
2
