Hoover HS84-SM2-M, Руководство пользователя

Страница: 7 / 24

OPERATION
6
Using the machine as a handheld
IMPORTANT: The handheld is to be used with water only, putting detergent into the water tank
can cause damage. Always check the tools are clean and free from debris, don’t use if damaged,
broken or worn.
Push handle release button
and lift handle to remove.
The collar should be gripped
with one hand when releasing
the handle with the other hand.
Plug into mains, turn the dial
to ‘on’ position. The red light
will illuminate to indicate
power on.
Press accessory release
button and lift steamer
to release floorhead.
Twist the steam control
dial to desired setting.
Push concentration nozzle
into steamer until it clicks
into place.
To produce steam squeeze
the trigger in short bursts.
Don’t hold the trigger
continuously to prevent
over wetting. Allow 30
seconds for steamer to
warm up. No sound will
be heard until trigger is
pressed. No steam will be
visible until after 30 seconds.
WARNING: Always switch OFF the steamer before attaching the concentration tool and accessories.