Hoover HC-AM-HKA, Руководство пользователя

Страница: 9 / 24

CYClOne separatOr
how to Clean
Remove dirt cup as described in Fig. 3.1.
3.3 To remove inner shroud, hold the dirt cup and rotate the shroud clockwise.
3.4 Hold the dirt cup and turn the separator counter-clockwise.
3.5 Dirt and debris can be cleaned from the filter assembly with dusting brush
or a towel or rag.
Replace the filter assembly on the dirt cup, and twist it clockwise to secure
into position.
Replace dirt cup.
To reduce the risk of personal injury - Unplug
vacuum before cleaning or servicing.
Do not use vacuum without dirt cup or filters
in place.
3.3 3.4
3.5
IMPORTANT
The cyclone separator should not be submerged in water.
WARNING
!
!
9
filters
To reduce the risk of personal injury - Unplug
vacuum before servicing.
Do not use vacuum without dirt cup or filters
in place. Allow filter to dry completely before
replacing.
IMPORTANT
Rinsable can be rinsed in warm water (max
40°C). Allow to air dry for 24 hours before
replacing. Do NOT use any detergents or
boiling water to wash filter.
When used and maintained properly, your
Rinsable Filter should not need replacement
within the warranty period. If desired, an additional
filter is available. Please contact our authorized
distributor. Contact information on last page.
what to Buy: rinsable filter
when to Clean
It is recommended that the Rinsable filter be
checked and cleaned at least every 2 months or
more frequently with heavy use.
how to Clean
Remove dirt cup as described in Fig. 3.1.
3.6 Twist dirt cup lid counterclockwise and remove
Rinsable filter.
3.7 Grasp tab on filter and remove from dirt cup.
3.8 Gently tap the filter on the inside of a trash
receptacle to remove dust and dirt.
3.9 Hold Rinsable filter under running water to
clean.
Allow to air dry for 24 hours before replacing.
Replace filter in dirt cup and twist lid clockwise until
secure.
Replace dirt cup.
rinsable filter
3.6 3.7
3.8
3.9
WARNING
!
!