Hoover FH50900RM, Руководство пользователя

Страница: 9 / 40

How to Remove
4.1 Remove dirty water tank from unit by pressing
on latch and pulling the tank out at an angle.
4.2 Pull up on latches to open dirty water tank.
Remove top and rinse tank with clean water.
4.3 To clean dirty water tank ducting, place dirty
water tank under faucet and dispense high pres-
sure clean water into the inlet port of the dirty water
tank to backflush any loose accumulated debris.
4.4 Allow tank to air dry completely. Pull up on
latches then back down to lock. Latches will snap
when locked.
4.5 Replace dirty water tank back onto unit until it
snaps.
Note: The filter screen is not removable. Attempts
to remove the filter screen from the tank may dam-
age the filter screen.
4.2
A
4.1
4.5
4.3
4.4
LUBRICATION
The motors and brushrolls are equipped with
bearings which contain sufficient lubrication for
their lifetime.
The addition of lubricant could cause damage. Do not
add lubricant to motors or bearings.
4. MAINTENANCE
Familiarize yourself with these home maintenance tasks as proper use and care of your cleaner will ensure
continued cleaning effectiveness.
Any other servicing should be done by an authorized service representative.
CLEANING THE DIRTY WATER
TANK
Note:
During normal use of cleaning, debris may
accumulate inside of dirty water tank. In order to
keep your unit functioning properly and to prevent
any odors from building up, it is best to rinse out
your dirty water tank with fresh water after each use.
Be sure to remove any debris that has
accumulated in the screen above the float. If the
screen becomes clogged, this may reduce the
performance of your cleaner.
IMPORTANT
9
To reduce the risk of personal injury - Unplug
before cleaning or servicing.
WARNING
! !