GB
IMPORTANT SAFETY REMINDERS
This cleaner should only be used for domestic cleaning as described in these
instructions. Please ensure that these are fully understood before operating the
appliance. This product is double insulated and must be unearthed.
Important: The wires in the power cord are coloured in accordance with the following
code:
Blue – Neutral Brown – Live
13 Amp fused plug on UK versions only.
GETTING STARTED
By following this step-by-step guide your new Hoover Dust Manager Cyclonic will be
ready for use:
• Remove cleaner and accessories from packaging. Please dispose of the
packaging in a safe and environmentally conscientious way.
• Open the top cover (A) ensuring that the Cyclonic cassette lid (B), pre-motor filter
(C1) and exhaust filter (C2) are fitted correctly. Close the top cover.
• Insert the hose end into the top cover, ensuring it clips and locks into position (D).
To release simply press in the two hose end latches and pull.
• Fix the free end of the hose into the handle using the lock ring (E).
• Fit extension tubes (F1), floor nozzle (F2), or other accessories as required for
use.
• Your Sensory Dust Manager Cyclonic is now ready for use. Extract the plug and
pull out all of the cord. Plug in and switch.
FEATURES – DEPENDING ON MODEL,
•
Hoover’s unique Dust Manager Cyclonic
cassette is the bagless system that
separates and collects the dust from the air thanks to its internal centrifugal force
thus ensuring maximum hygiene and environment safeguard.
•
On/Off button (G).
Once plugged in, press this button to start the cleaner. Press
it again to stop the cleaner before removing the plug after use.
•
Cord rewind button (H).
Remove the plug from the power supply. Press this
button to wind the power cord back into the cleaner.
•
Overheating Protection.
Cleaner automatically switches off. In this event extract
the plug from the socket and allow cleaner to cool for 30 minutes. Check if the
Cyclonic cassette needs cleaning or if there is a blockage in the system (see
chapter: “Filter Maintenance” and “Removing A Blockage From The System”).
•
Fixed power control
(depending on model). Adjust the suction by moving the
handle valve (I): suction will decrease when opening the valve. Use low suction for
delicate fabrics.
•
Variable power control (J)
(depending on model). Rotate the on/off button to
increase or decrease suction Use low suction for delicate fabrics.
•
Carpet and floor nozzle (K).
Press pedal on the nozzle to lower the brushes
when cleaning hard floors. Press the pedal again to lift the brushes when cleaning
carpets.
•
Turbo nozzle
(depending on model). Use the Turbo nozzle for deep cleaning on
carpets. IMPORTANT: do not use Turbo nozzle on rugs with long fringes, animal
hide and over carpet piles with a depth exceeding 15mm. Do not keep the nozzle
stationary while the brush is rotating. Also available as an additional accessory.
