5
Attach dirt cup to cleaner by
first hooking tab (A) at back of
cleaner into cup. Then pivot (B) and
(C) sections together making sure
latch is secure.
The belt
The long-lasting belt may never
need to be replaced. However, if
the belt should break it can be
replaced by contacting your local
Authorized Hoover Dealer (Depot) or
Hoover Factory Service Center.
The brush roll
How to clean
Disconnect cleaner from elec-
trical coutlet
To maintain cleaning effective-
ness, periodically remove lint,
strings, etc. from the brush roll either
from the bottom of the nozzle (A) or
by removing the lens (B) on top of
the nozzle.
To remove lens, turn cleaner
over and remove 2 Phillips
screws at each end of the nozzle.
Turn cleaner over and lift off lens.
Clean brush roll. Replace lens,
reposition screws, and tighten
securely.
When to replace
Replace the brush roll when
the brushes do not touch the
edge of a card as it is moved across
the opening on the bottom of the
nozzle.
A new brush roll can be installed by
your local Authorized Hoover Dealer
(Depot) or at a Hoover Factory Service
Center.
12
A
B
C
Battery disposal
(Cordless model only)
Your cleaner contains nickel cadmi-
um batteries.
When these batteries no longer
recharge, they must be removed
from the cleaner and disposed of
properly in accordance with state
laws.
If you want to have a new battery
pack installed, contact your local
Hoover Factory Service Center.
The following instructions are for
disassembly purposes ONLY.
How to remove battery
pack
NOTE:
Do not remove the batteries
to recharge them. The batteries
should only be removed if they no
longer recharge and you plan to
replace the batteries or dispose of
the cleaner.
12
16
13
14
15
A
B
13
14
15
16
Continued
