2
GETTING TO kNOw yOUR ClEANER
A. Cleaner main body
B. Dust Container
C. Dust Container Handle
D. Dust Container Release Button
E. Cleaner Handle
F.
On/Off Button
G.
Cord Rewind Button
H. Nozzle Parking slot
I.
Exhaust Filter Cover
J.
Hose
K. Hose Release Button
L.
Hose Handle
M. suction Regulator*
N. standard Tube*
O. Telescopic Tube*
P. Telescopic Tube Adjuster*
Q. Carpet and Floor Nozzle(
GP
)**
R. Floor Type selector Pedal**
s. Pre-motor Filter and Protective Mesh
T.
Exhaust Filter
U. Accessories Holder*
V. 2 in 1 Tool (Crevice Tool/Dusting Brush)
W. Pet Hair Remover Mini Turbo Nozzle*
X. Allergen Remover Mini Turbo Nozzle*
Y. Hard Floor Nozzle*
ASSEmblING yOUR ClEANER
Remove all components from the packaging.
1. Connect the hose to the cleaner main body, ensuring it clips and locks into position.
2. To release the hose: simply press the two hose release buttons on the hose end
and pull it out.
[2]
3. Connect the hose handle to the telescopic tube* upper end.
[3]
4.
Connect the telescopic tube* lower end to the carpet and floor nozzle**.
[4]
Q1. Carpet Nozzle (
CA
)**
Q2. Hard Floor Nozzle (
HF
)**
*Certain models Only
** Certain models only, nozzles may vary according to model
U
SING yOUR ClEANER
1. Extract power cord and plug it into the power supply.
[5]
Do not pull the cord beyond
the red marker.
2.
Adjust the telescopic tube* to the desired height by moving the telescopic tube adjuster
up and raise or lower the handle to the most comfortable cleaning position.
[6]
3.
Carpet & Floor Nozzle**. Press the floor type selector pedal on the nozzle
[7]
to
select the ideal cleaning mode for the floor type.
Hard Floor
– Brushes are lowered to protect the floor.
Carpet
– Brushes are raised for the deepest clean.
4. switch the cleaner on by pressing the On/Off button on the cleaner main body.
[8]
5. Vary the suction as desired by closing or opening the suction regulator* on the hose
handle.
[9]
6. switch off at the end of use by pressing the On/Off button.
[8]
Unplug and press the
cord rewind button to wind the power cord back into the cleaner.
[10]
7. To store your cleaner, park the nozzle in the parking slot at the rear of the cleaner
main body.
[11]
ACCESSORIES
To obtain the best performance and energy efficiency
#1
it is recommended that the
correct nozzles are used for the main cleaning operations. These nozzles are indicated
in the diagrams by the letters
GP
,
HF
or
CA
.
A nozzle type
GP
can be used to clean both carpet and hard floor.
A nozzle type
HF
is suitable for use only on hard floor.
A nozzle of type
CA
is suitable for use only on carpet.
The other nozzles are accessories for specialist cleaning tasks and are recommended
for occasional use only.
It is important to note that this vacuum cleaner is supplied with an Energy Label as re-
quired by European Regulation (EU) 665/2013.
If the label shows a red prohibition circle on the left covering the carpet symbol, then this
indicates that the vacuum cleaner is not suitable use on carpets.
If the label shows a red prohibition circle on the right covering the hard floor symbol, then
this indicates that the vacuum cleaner is not suitable for use on hard floors.
#1
NOTE:
Dust pick up ability carpet, dust pick up ability hard floor, and energy efficiency
in accord with Commission Regulations (EU) 665/2013 and (EU) 666/2013.
