Keep your Air
™
Cordless Lift running properly: brush roll
Remove battery
& lower the
handle.
Pull tabs
towards the
brush roll
and lift up.
Pull the brush
roll out from
this end and
remove debris.
Flip vacuum
over.
Replace clean
brush roll into
belt and seat
both ends.
Reinsert the
plate as shown
then snap back
into place.
1
2
3
4
5
6
WARNING
Risk of personal injury: brush roll may suddenly restart if battery is in place.
Turn power switch off and remove battery before cleaning or servicing.
!
!
LUBRICATION NOT REQUIRED
The motor and brush roll are equipped with bearings which contain
sufficient lubrication for their lifetime. The addition of lubricant could
cause damage. Do not add lubricate to motor or brush roll.
Insert the core into
the dirt cup so the
tabs align.
Use 2-in-1 tool to brush
any dirt or debris from
core. Do not turn
vacuum on.
Insert filter assembly back
into the core by aligning
the tabs.
Replace the dry filter
with the mesh tab
facing out.
7
6
8
9
11
12
Keep your Air
™
Cordless Lift running properly: filters & core
