background image

6.

17.  To prevent electrical shock, 

do not

 use the 

vacuum cleaner outdoors or on wet surfaces.

18.  Extreme caution should be exercised when 

using the appliance on stairs.

19. 

Never

 clean the vacuum cleaner or any of 

the electrical parts, especially the electrical 

connections with water or liquid cleaners.

20. 

Do not

 attempt to change the attachments 

while the appliance is plugged into the mains 

power supply. First switch off and remove the 

power plug from mains power supply. Use only 

manufacturer’s recommended accessories.

21.  Ensure the appliance is disconnected from the 

mains power supply before connecting the hose 

to the unit.

22. 

Do not

 operate or use the appliance without the 

dust bag and/or filters in place.

23.  If the air inlet, floor head or the telescopic tube 

is blocked, switch off the cleaner straight away 

and remove from the mains power. First clear 

the blocked object before attempting to start the 

cleaner vacuum again. 

24. 

Do not

 leave the appliance unattended when it is 

connected to a mains power supply.

25.  Before carrying out any maintenance service 

or cleaning the filters, always switch off the 

vacuum cleaner and disconnect the plug 

from power supply.

26. 

Do not

 use the vacuum cleaner if it is 

damaged or breaks down. Check the electrical 

components regularly for defects. If connection 

cables, electrical hoses, electrical contacts and 

electric tubes are damaged, have them replace 

immediately.

27. 

Never

 attempt to make any modifications 

electrically to the vacuum cleaner.

28.  Always store the appliance indoors in a cool 

and dry place.

29.  Damage caused by improper use or by not 

observing the instructions in this manual will 

void the warranty.

Vacuum Cleaner with Powerhead

1.  The electric hose contains electrical connections;
 

-   

Do not

 immerse in water.

 

-   The hose should be checked regularly and 

must not

 be used if damaged.

 

-   The vacuum cleaner handle contains electrical 

connections. The handle is not a serviceable 

part.

 

-   The vacuum cleaner rod contains electrical 

connections. The rod is 

not

 a serviceable part.

 

-   The vacuum cleaner powerhead contains 

electrical connections the powerhead is not 

a serviceable part.

2.  Use the electric powerhead only for vacuuming 

dust and dry substances in the home.

3. 

Never

 run over the power cable with the 

powerhead to avoid damage.

4. 

Never

 touch the brush roller while the vacuum 

cleaner is connected to the mains.

5.  To prevent unnecessary wear on the powerhead, 

keep the powerhead moving while in operation.

6.  Keep hair, hands and feet away from the rotating 

brush while the powerhead is running.

Содержание 9011PH Regal





















Отзывы: