Before you Begin
7.
Assembly
IMPORTANT! Always remove the power plug from the
power supply before fitting or removing accessories!
LIVE PARTS within the hose, rod and powerhead.
1. Flexible Hose
Fitting:
Insert the flexible hose into the hose inlet of the vacuum. Press until it clicks
into position.
Removing:
Press the two buttons and gently pull to release the flexible hose.
b. Place the powerhead onto the floor and gently insert the telescopic
tube into the powerhead. Push until it clicks into place.
2. Handle & Rod
Note: Ensure that the powerhead switch located on the
handle is in the “Off” position before fitting the handle to
the rod. When not using the powerhead, ensure that the
Powerhead On/Off Button is in the “Off” position.
a.
Gently insert the handle into the telescopic tube and push until it
clicks into place.
