9
If the internet cable power connect is correct, it appears device styles, name, and IP address in the
device list, (if it doesn
’
t appear, please confirm power & internet cable work normally).
As the interface, left side is the current computer configuration information; right side is the
selected device network configuration information. Default IP camera address is
192.168.1.126, HTTP interface is 80.
Note:
1. Device information indicates IP camera information.
2. When current computer is the stable IP, (none DHCP IP), the first time use IP Camera, you
could click auto set, to sync local Information to the IP camera IP address, gateway and
DNS
3.If it needs manual modify camera name, HTTP interface, IP address, sub-net mask, gateway,
main DNS server, backup DNS server, etc. please click apply after modification, enter IP
camera username and password, click confirm is OK.
4. Inner visit address is LAN visit address; outer visit address is WAN visit address.
5. When IP camera connects to outer net by the first way, before outer net visit IP
camera, port forwarding
is necessary
in the senior router: analog server set. e.g., IP address of
one device in the LAN: 192.168.1.126, port is 80, so it
’
s necessary to open IP: 192.168.1.126 port
80(TCP) in router, besides, in the same LAN, different camera should come with different port, to
make sure there is no port interference in LAN;
6. As port forwarding in the router, please refers to other chapter in router port forwarding
set.
3.2. Logging and Active X Installation
Before IE monitoring through web, it is necessary to install video plug-in,
Double click
“
Appinstall.exe
”—“
Next
”—“
Install
”—“
Finish
”
.
