Step 1:Attach the tube join support by sliding in
tube into legs, make sure height of the 2 legs are
the same.
Step 2:Attach the second join support in front of
the tube join support using provided allen wrench
(C) with bolt (A).
Step 3:Assembly the join
support from below, using
provided allen wrench (C)
with bolt (B).
Step 5:Adjust table height by pushing up or down
button on right front side of table top
Step 6: Attach the "U''
bracket (E) using screws
(D) with screw driver,
right in the middle of
join support bar.
Step 7:Adjust Leveler
if needed to level case
on uneven floor.
Step 4:Attach the table top, using screw driver
with screws (D), before screwing the top table,
place the table top above 2 side panels, make
sure table edges flat with side panels. Adjust
table height up by pushing up button until have
enough space to screw the table top.
1
1
1
2
3
4
1
2
2
2
