18
19
EN
Preparatory work
> Getting to know the appliance
Figure
1
1
Charging indicator light
2
Cleaning indicator
3
Battery indicator
4
Recessed grip to release dust
bin compartment cover
5
Mains adapter
6
Mains adapter cord
7
Mains adapter plug
8
Battery compartment cover
9
Battery pack
10
Battery compartment
11
Rubber-coated drive wheels
12
Slide controller to set sensitivity
of antifall sensors
13
Round brooms
14
Mount for round brooms
15
Suction inlet
16
Charging socket on appliance
17
ON /OFF switch
Figure
7
1
Dust bin compartment cover
2
Dust bin cover
3
Filter
4
Dust bin
5
Recessed grip to release dust
bin compartment cover
6
Dust bin compartment
> Introducing displays
Figure
1
1
Charging indicator light
· Flashes blue, when the battery pack is charging
· Lights up with constant blue light
when the battery pack is fully charged
· Flashes alternately with battery indicator
during operation
2
Cleaning indicator
· Lights up red when dust bin must be emptied
3
Battery indicator
· Lights up red when battery pack must be
charged or appliance has no contact to floor
· Flashes alternately with charging indicator
light during operation
> Unpacking and preparing
1
Check that the unpackaged contents are com-
plete (Fig. 1). If you notice any transport damage
or if anything is missing, contact your dealer
immediately.
2
When using the appliance on hard floors,
attach the round brooms one after the other
as shown (Fig. 1 / 13).
> Inserting the battery pack
1
Firmly remove cover from battery compart-
ment (Fig. 5 / OPEN).
2
Insert the provided battery pack. Ensure that the
sticker with the words “This side up” is facing up
and the contacts in the battery compartment are
able to engage in the apertures in the insulation of
the battery pack. For this purpose, let the battery
pack first slide into the battery compartment on
the side with the contacts (Fig. 6) and then press
the battery pack into the battery compartment on
the other side (Fig. 8). The battery pack must rest
evenly on the bottom of the battery compartment.
3
Reattach the cover of the battery compart-
ment and slide it firmly into its bracket until
you hear and feel it click into place.
> Charging the battery pack
WARNING!
Risk of fire or explosion! Only use the mains
adapter included in the scope of supply to
charge the battery pack.
1
Ensure that the ON / OFF switch is in
position
0
(Fig. 11 / B).
2
Connect the plug of the mains adapter cable
to the charging socket on the appliance (Fig. 9).
3
Connect the mains adapter to a socket (Fig. 10).
The charging indicator light (Fig. 1 / 1) lights
up blue to indicate the charging process.
4
After a maximum of 6,5 hours, the charging
indicator light remains blue. The recharge-
able battery is then charged.
5
Disconnect the mains adapter from the socket
(to save electricity) and disconnect the plug of
the mains adapter cable from the appliance.
NOTE:
If you want to remove the round brooms,
grab the bristles and pull the round brooms
away from the appliance (Fig. 13 / B).
