Shepherd 210A Operation Manual V1.1
©Copyright 2004. Hongda USA Inc.
8
5.9. When 2 beeps sound, that person’s fingerprint was successfully
registered.
The display should show 03 – 11 – 07. (The next available
Supervisor ID is now 07 since you just used up 06)
5.10.
If 3 beeps sound, the registration was not successful. You can
immediately press
STOR
until a long beep (about 3 seconds) and try
again from Step 5.8 above. However, if the power has Timed Out,
and you hear the motor sound, then you must start over from Step 5.4
above.
5.11.
After a successful registration, you can immediately register
another person starting with Step 5.5 above, or if Timed Out, start at
Step 5.4.
5.12.
After registrations, wait about 10 seconds for the lock to Time
Out before trying to test the fingerprint access system.