Hongda USA Shepherd 210A Скачать руководство пользователя

Страница: 12 / 15

Shepherd 210A Operation Manual V1.1

Unlocking the door with your fingerprint

(Included here for convenience; also in Door Operation Section

Error!

Reference source not found.

3.1. Press

Power On

button (Outside)

3.2. Immediate place your chosen finger firmly on the window exactly as

you did during registration

3.3. If successful, the green light flashes, there is a beep and the deadbolt

will retract automatically. You will have 5 seconds to push down on

the door handle. (If the deadbolt was not extended, you can see the

green light flash and hear a noise indicating the door mechanism is

being activated after accepting a proper fingerprint.)

3.4. If there are

three

beeps, the fingerprint was rejected. This means the

finger was positioned and/or pressed in a way that did not match the

registration. Simply press the Power On button again and place your

finger again. With a little practice, you will unlock the door every

time. (Note: Section 1 describes how to set the threshold level, and

how to trade-off ease of acceptance with tight security.)

3.5.

Hint

: If you have difficulty activating the lock and your rejection

rate is more than half the time, consider registering a different finger,

different pressure/position, etc. A simple

mass delete

can be done per

Section

Error! Reference source not found.

Содержание Shepherd 210A
















Результаты поиска

Содержание Shepherd 210A

Отзывы:

Похожие инструкции для Shepherd 210A

Бренды по названию

Популярные бренды

Hongda USA Shepherd 210A, Руководство по эксплуатации

Результаты поиска

Содержание Shepherd 210A

Отзывы:

Похожие инструкции для Shepherd 210A

Бренды по названию

Популярные бренды