Honeywell VXP, Руководство по техническому обслуживанию системы, Страница: 43 / 105

System Operations
VXP System Maintenance Manual 3-7
3.2.3 VXP Log Files
The log files generated by the AU can be viewed on the Display Unit or printed on the serial
printer. Log files that are required for later use should be downloaded to the DU, where they may
be stored on the hard drive or transferred to a floppy disk. To access the log files, the AU and DU
must be connected via the 902-15371 or 902-17317 AU to DU cable. The logs stored on the AU
will be from the last aircraft tested. Logs from previous runs will have been overwritten. Refer to
the on-line User Guide for more information on log files.
Log files may be viewed as follows:
1. Apply power to the system.
2. After the main desktop appears on the DU, launch the VXP DP by double clicking
on (or touching twice in rapid succession) the VXP icon
. The Start Up dialog
box will appear.
3. Establish communication with the AU by clicking on the OK button or pressing the
Enter key (the “ Connect To AU ” option is selected by default).
4. Enter the ID number of the aircraft or select the desired ID number from the drop
down menu, and click on
OK (or press the Enter key).
5. The Select Procedure window of the AP will display.
6. Click on the View Log button. The View Logs dialog box will appear (Figure 3-5).
7. Select the desired logs to be viewed and press the View button.
Figure 3-5. View Logs Window
Log files may be printed as follows:
1. Connect the serial printer to the AU via the 902-15371or 902-17317 AU to DU
cable.
2. Apply power to the system.
3. After the main desktop appears on the DU, launch the VXP DP by double clicking
on (or touching twice in rapid succession) the VXP icon
. The Start Up dialog
box will appear.
4. Establish communication with the AU by clicking on the OK button or pressing the
Enter key (the “ Connect To AU ” option is selected by default).