1
Honeywell
Thank you for purchasing Honeywell VENTI
Series
Network Camera. Before installing it, please verify your
model and read this guide carefully. See the VENTI
Series Network Camera Reference Guide located on
your software CD for more information about setting up
your camera.
Before installing the camera, Honeywell recommends
that you check
http://www.cn.security.honeywell.com/
to
find your camera and download the latest manuals and
software updates.
Warnings
Installation and servicing should be performed only by
qualified and experienced technicians to conform to all
local codes and to maintain your warranty.
12V DC/24V AC models require the use of
CSA Certified/UL Listed Class 2 power
adapters to ensure compliance with
electrical safety standards. Power over
Ethernet (PoE) should meet the
IEEE802.3 af PoE standards.
WEEE (Waste Electrical and
Electronic Equipment).
Correct
disposal of this product (applicable in
the European Union and other
European countries with separate
collection systems). This product
should be disposed of, at the end of its
useful life, as per applicable local laws,
regulations, and procedures
VENTI
Series
D1, 720P Box Camera
Quick Guide
FCC Compliance
Information to the user:
This equipment has been tested
and found to comply with the limits for a Class B digital
device, Pursuant to Part 15 of the FCC Rules, these limits
are designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation.
In this equipment does cause harmful interference to radio
or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to
correct the interference. For example, try reorienting or
relocating the receiving antenna, increasing the separation
between the equipment and receiver, or connecting the
equipment to an outlet on a different circuit.
Caution
Changes or modifications not expressly
approved by the party responsible for
compliance could void the user’s authority to
operate the equipment
This Class B digital apparatus complies with
Canadian ICES-003.
Europe
The manufacturer declares that the equipment supplied
with this guide is compliant with the essential protection
requirements of EMC directive 2004/108/EC and
General Product Safety Directive GPSD 2001/95/EC,
conforming to requirements of standards EN 55022 for
emissions, EN 50130-4 for immunity.
