Honeywell TWM 9000, Дополнительное руководство по инструкции

Страница: 29 / 64

OPERATION
4
29
TWM 9000
www.honeywellprocess.com 34-VF-25-37 iss.2 GLO Jan 18 US
Limitation_High R/W Limitation max process input (Fct. C1.2.1) 12.0
Setting:
0.001 … 100.000
Flow_Direction R/W Flow direction (Fct. C1.2.2) 0
Setting:
0: normal / 1: reverse
Time_Const R/W Time constant process input (Fct. C1.2.3) 0.25
Pulse_Filter R/W Pulse filter (Fct. C1.2.4) 0
Setting:
0: off / 1: on
Pulse_Width R/W Pulse width A (Fct. C1.2.5) 0.2
Setting:
0.01 … 10.0
Pulse_Limitation R/W Pulse limitation (Fct. C1.2.6) 0.05
Setting:
0.01 … 100.0
Noise_Filter R/W Noise filter (Fct. C1.2.7) 0
Setting:
0: off / 1: on
Noise_Level R/W Noise level (Fct. C1.2.8) 0.1
Setting:
0.01 … 10.00
Noise_Suppression R/W Noise suppression (Fct. C1.2.8) 2.0
Setting:
0.0 … 10.00
Low_Flow_Cutoff R/W Low flow cutoff threshold process input (Fct. C1.2.10) 0.0
Setting:
1.0
…
10.00
Hysteresis R/W Low flow cutoff hysteresis process input (Fct. C1.2.10) 0.0
Setting:
0.0
…
10.00
PRIMARY_VALUE PRIMARY_VALUE PRIMARY_VALUE PRIMARY_VALUE
PRIMARY_VALUE_ PRIMARY_VALUE_ PRIMARY_VALUE_ PRIMARY_VALUE_
RANGE
RANGE RANGE
RANGE
R/W There are 6 Primary Values (1 … 6); Setting is for all identical.
Therefore the description follows only for Primary Value 1.
-
Setting:
•
1 (volume flow in m
3
/s)
•
2 (mass flow in kg/s)
•
3 (speed in m/s)
•
4 (coil temperature in ° C)
•
5 (conductivity in S/m)
•
6 (electronic temperature in ° C)
PRIMARY_VALUE_1
PRIMARY_VALUE_1 PRIMARY_VALUE_1
PRIMARY_VALUE_1
Primary Value 1 Primary Value 1 Primary Value 1 Primary Value 1
R The measured value and status available to the Function
Block.
-
STATUS
Status
R Digital transducers, unlike their analogue versions, can detect
faults that make the measurement bad or prevent the
actuator from responding. This additional, valuable
information will be passed along with each transmission of a
data value in the form of a status attribute.
-
VALUE
Value
A numerical quantity entered by a user or calculated by the
algorithm.
Parameter
Parameter Parameter
Parameter
Subelement Access Description and settings Initial Value