Honeywell TRS-3300 Скачать руководство пользователя страница 47 | Manualshive

Страница: 47 / 60

Honeywell TRS-3300 Скачать руководство пользователя страница 47

Installation and Operating Instructions TRS 33xx

47

Entry time error

This message comes from the master computer and denotes the
following:
The booking sequence Clock-In / Clock-Out together with the
respective entry times was incorrect on this day. The computer can
therefore no longer process the entries and refuses every entry from
here on with this message.

Identity card unknown

Identity card unknown. The identity card used for booking is not
registered in the terminal.

Info inquiry not permitted

The <Info> key is blocked for this identity card. An authorization for
the <Info> display is not noted for this identity card.

Key not allowed

The key activated by the user has not been enabled for him in the time
recording software.

No identity cards

The terminal has been parameterized but no identity card data has
been downloaded.

Reason incorrect

During a Business errand entry with reason, the absence reason
selected cannot be allocated by the system; possibly, the current
absence reason table is not stored in the terminal.

Reading error !!

The card was not read properly. The booking must be repeated.

System number incorrect

The identity card used for the booking has the incorrect system
number.

Time total inquiry not
allowed

The authorization for time total inquiry at the terminal is not assigned
to the employee in the personnel master record of the time recording
software.

>>> Terminal not

ready to run <<<

This message is displayed as long as the terminal is not in a
parameterized state.

Version number incorrect

The identity card used for the booking has the wrong version number.

Weekly pattern <0> not
allowed

This message can only appear in an OEM application of the terminal,
when a personnel master record has no valid weekly pattern number
(1 - 250) assigned to it.

«
...
45
46
47
48
49
...
»

Содержание TRS-3300





























































Отзывы:

Нет отзывов