Honeywell TRS-3300 Скачать руководство пользователя страница 46 | Manualshive

Страница: 46 / 60

Honeywell TRS-3300 Скачать руководство пользователя страница 46

46

Installation and Operating Instructions TRS 33xx

7.

Error messages

An error message appears as a text in the display and is accompanied by a long buzzing sound. If the
reader can recognize the identity card number, this will be shown above on the display:

Error: 0010

Message

Meaning

AOB entry not allowed

The official business key is blocked for this identity card. An official
business authorization is not noted for this identity card.

AOB-Out time error

The AOB-Out entry took place beyond the time span for "AOB enry
allowed" defined in the daily work or no time span was defined.

AOB-In time error

The AOB-In entry

took place beyond the time span for "AOB enry

allowed" defined in the daily work pattern or no time span was
defined.

Clock-In and present

ENTERING and present. This message appears when two Clock-In
entries occur in a row without an Clock-Out entry occuring between
them. This message appears in ONLINE operation on remote station
terminals within the booking permission, otherwise, <Bkng. beyond
perm.> is displayed.

Clock-In time error

The Clock-In entry occured beyond the allowed period. (s. Clock-Out
time error)

Clock-Out and absent

EXITING and absent. Same as Clock-In and present, except that,
between two Clock-Out entries, the Clock-In entry was forgotten. This
message appears in ONLINE operation on remote station terminals
within the booking permission, otherwise, <Bkng. beyond perm.> is
displayed.

Clock-Out time error

The Clock-Out entry took place beyond the time span for "Booking
allowed" defined in the daily work pattern.

Data base not initialized

No data can be stored in the terminal because the data base has not
yet been set-up in the terminal. This happens during the initial start-
up.

Daily pattern not found
Weekly pattern not found

The terminal has not been loaded accordingly with data or has had no
connection to the computer for several days no connection to the
computer.

EEPROM fault

> system halted

The EEPROM installed in the terminal is faulty and the terminal is no
longer ready for operation.

Entry memory full !

The memory in the terminal used for buffering the offline entries is full
because the master computer has not picked up data from the
terminal for too long a time.

«
...
44
45
46
47
48
...
»

Содержание TRS-3300





























































Отзывы:

Нет отзывов