manualshive.com logo in svg

Honeywell TP979A-E, Руководство по установке, Страница: 6 / 6

Поделиться
Скачать
Honeywell TP979A-E Скачать руководство пользователя страница 6

Remove or add Inserts to Cover as required. 6, Remove liner from  adhesive on back of Window, Slide
Wash Cover with mild dish detergent solution and dry Window into Cover opening (Fig. 11) and press in place.

When Window has been assembled to Cover,

disassembly might damage Window. Therefore, before
installing Window, note the following:
a.

b.

a.

b.

Check that Window display is correct for

job requirements.

Check Window orientation to cover. Cover setpoint
and DAY/AUTO lever slots should be on the bottom.
If using 14004065-XXX Window (with display),
leave Window out of cover, paint with approved
paint, and allow to dry. Proceed to Step 6.
If using 14004066-XXX Window (blank 

with 

or

without logo), add window to Cover, paint with

 

 and allow to dry. Painting is complete,

with paper towel.

WINDOW CURVED
FOR INSTALLATION

Fig. 11. Installing Window.

24106

Honeywell

Home and Building Control Home and Building Control

Honeywell Inc.

Honeywell Limited-Honeywell 

Honeywell Plaza 740 Ellesmere Road

P.0. Box 524 Scarborough, Ontario

Minneapolis, MN 55408-0524

M1P 2V9

Helping You Control Your World

 TAB: II. 

 2.a. Rev. 

Printed 

in USA

Содержание TP979A-E







Отзывы:

Нет отзывов