Honeywell touchpoint Pro, Руководство по эксплуатации, Страница: 97 / 100

ILLUSTRATIONS
Touchpoint Pro
Pt. No. 2400M2566_1_EN 88 Operating Manual
18 List of Illustrations
Figure 1. Electrical Warning Label 1 8
Figure 2. Electrical Warning Label 2 8
Figure 3. Protective Earth (Ground) Point 8
Figure 4. Equipment Earth (Ground) Point 8
Figure 5. Controller Rear Cover with Example Labels 8
Figure 6. Example of a Typical System Rating Label 9
Figure 7. Typical TPPR Product Label 9
Figure 8. Keep Children Away 10
Figure 9. No Naked Flames 10
Figure 10. Use Caution 10
Figure 11. Electrical Hazard 10
Figure 12. Read The Instruction Manual 10
Figure 13. Wear Eye Protection 10
Figure 14. Hazardous Waste (Pb = Lead) 10
Figure 15. Recycle Only 10
Figure 16. TPPR Building Blocks 12
Figure 17. TPPR Controller with Remote Units and Field Devices 13
Figure 18. TPPR Enclosures 14
Figure 19. TPPR Controller Cover with Connection Map 14
Figure 20. TPPR Controller 16
Figure 21. TPPR Backplane 17
Figure 22. TPPR Controller Typical Schematic 17
Figure 23. Ring Circuit With All Modules Working 18
Figure 24. Ring Circuit With a Failed Module 18
Figure 25. TPPR Module Types 19
Figure 26. Typical Power Supply Setup 20
Figure 27. Choice of PSU Size (120 W / 240 W / 480 W) 20
Figure 28. Power Redundancy Module Operation 21
Figure 29. DC-UPS and Battery Configuration 22
Figure 30. Battery Circuit 24
Figure 31. System Status Normal 29
Figure 32. System Status with Example Active Events 29
Figure 33. Touchscreen Navigation – Input and Output 30
Figure 34. Touchscreen Navigation – Active Events 31
Figure 35. Input Details Screen 33
Figure 36. Outputs Screen 33
Figure 37. Outputs Screen with filter options 33
Figure 38. Trend Graph Screen 34
Figure 39. Fault Latch Output Configuration 43
Figure 40. Active Events Screen with Filter Options 45