14
15
13
12
SPECIFICATIONS
Main Unit
Indoor Temperature
Proposed operating range:
-5.0
°
C to +50.0
°
C/23.0
°
F to 122.0
°
F
Temperature resolution: 0.1
°
C/0.2
°
F
User-selectable (F
°
or C
°
) temperature display
Low battery indicator
Wall Mount or Desktop option
Remote Sensor
Remote Temperature
Proposed operating range with alkaline batteries:
-20.0
°
C to + 70.0
°
C/-4.0
°
F to + 158
°
F
Proposed operating range with lithium batteries:
-38.8
°
C to + 70.0
°
C/-38.0
°
F to +158
°
F
Temperature resolution: 0.1
°
C/0.2
°
F
Low battery indicator
RF Transmission Frequency: 433 MHz
Maximum number of remote sensors: 3 (one included)
RF transmission range: Maximum 100 feet (30 meters)
Temperature transmission cycle:
approximately 45 seconds
Power
Main unit:
2 AA size (UM-3) 1.5V batteries (not included)
Remote Sensor:
2 AA size (UM-3) 1.5V batteries (not included)
Dimensions
Main unit:
2.89(L) x 3.64(H) x 1.47(D) inches
Remote sensor:
2.37(L) x 4(H) x 1(D) inch
• Use only fresh batteries. Do not mix new and old batteries.
• Read the user's manual thoroughly before operating
the units.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired operation.
Warning: Changes or modification to this unit not expressly
approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
NOTE: This equipment had been tested and found to comply
with the limits for a Class B Digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment, installed and used in
accordance with the instructions, may cause harmful
interference to radio communications.
There is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to improve or correct turning the interference
by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV
technician for help.
DECLARATION OF CONFORMITY
We
Name: Hideki Electronics, Inc.
Address: 7865 SW Mohawk, Tualatin, OR 97062
Telephone No.: 1-503-612-8395
declare that the product
Product No.: TM004
Product Name: In/Out Thermometer with Remote Sensor
Manufacturer: Hideki Electronics Ltd.
Address: Unit 2304-06, 23/F Riley House, 88 Lei Muk
Road, Kwai Chung, New Territories, Hong Kong
is in conformity with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received,
including interference that may cause undesired
operation.
The information above is not to be used as contact
for support or sales. Please call our customer
service hotline (refer to the Standard Warranty
Information) for all inquiries instead.
STANDARD WARRANTY INFORMATION
This product is warranted from manufacturing defects for
one year from date of retail purchase. It does not cover
damages or wear resulting from accident, misuse, abuse,
commercial use, or unauthorized adjustment and repair.
Note that online product registration is required to ensure
valid warranty protection.
To register your product, go to our Company website at:
www.honeywellweatherstations.com. Click Online
Product Registration under the Customer Service menu.
Should you require assistance with this product and its
operation, please contact our
Customer Service Hotline 1(866) 443 3543
Please direct all returns to the place of the original
purchase. Should this not be possible, contact Customer
Service Hotline for assistance and to obtain a Return
Merchandise Authorization (RMA). Returns without a
return authorization will be refused. Please retain your
original receipt as you may be asked to provide a copy
for proof of purchase.
Hideki Electronics, Inc. reserves the right to repair or
replace the product at our option.
Copyright (2005) Hideki Electronics Inc. All Rights
Reserved. The Honeywell Trademark is used under
license from Honeywell Intellectual Properties Inc.
Honeywell International Inc. makes no representations
or warranties with respect to this product.
