background image

TH7000 Series 

11

69-2668—03

Auto Changeover

 (Setup Function 0300): When set to Auto, the thermostat automatically selects heating 

or cooling depending on the indoor temperature. Heat and cool settings must be at least 2 degrees apart. If 
function 0380 is set to On, the heat and cool settings must be at least 5 degrees apart.

Remote Sensor

 (Setup Function 0340): If an optional outdoor sensor is installed, the thermostat can 

display the outside temperature. If an optional remote indoor sensor is installed, the thermostat will display 

the temperature at the sensor location (the internal sensor in the thermostat is not used).

Adaptive Intelligent Recovery

 (Setup Function 0530): Allows the thermostat to “learn” how long the 

furnace and air conditioner take to reach programmed temperature settings, so the temperature is reached 

at the scheduled time.

Compressor Protection

 (Setup Function 0580): Forces the compressor to wait a few minutes before 

restarting, to prevent damage. During this time, the message “Wait” flashes on the display.

Heat Pump Temperature Lockout

 (with 

fossil-fuel backup): If the thermostat is installed with an optional 

outdoor sensor, you can select a compressor lockout temperature (Function 0350). When the outdoor tem

-

perature is below the lockout temperature, only the auxiliary heat operates. When the outdoor temperature 
is above the lockout temperature, only the compressor operates.

Heat Pump Temperature Lockouts

 (with electric heat

 backup): If the thermostat is installed with an 

optional outdoor sensor, you can select a compressor lockout temperature (Function 0350) and/or an aux

-

iliary heat lockout temperature (Function 0360). When the outdoor temperature is below the compressor 
lockout temperature, only the auxiliary heat operates. When the outdoor temperature is above the auxiliary 
lockout temperature, only the compressor operates. If the outdoor temperature is between the compressor 
and auxiliary lockout temperatures, both the compressor and auxiliary heat can operate.

Shaded areas below apply only to 

TH7220

.

Special functions

Please contact your distributor to order replacement parts.

Outdoor temperature sensor

 .................................

Part Number C7089U1006

Remote indoor temperature sensor

 ......................

Part Number C7189U1005

Cover plate*

 .............................................................

Part Number 50002883-001

*(Use to cover marks left by old thermostats.)

Accessories & replacement parts

Содержание TH7000 Series













Отзывы: