Page 6
Attaching the Terminal Support Plate
Channeling the Cables from the Bottom of the Box
As an alternative, you can channel the cables so that they issue from the
bottom of the box (see Figure 3). This alternative procedure consists of the
following steps:
1. Drill a hole in the breakaway tab and apply a cable clamp with a clutch for
the cable tube.
2. Remove the cable clamps from the rear side and apply the stopper.
Anchor
Anchor
PG9 cable
clamp
Multi-pole
cable
(15 poles)
Figure 3. Channeling the Cables from the Bottom of the Box
