37
alarm selection screen
Viewing Remote Temperature and Humidity Max/Min Readings
In the
Temperature and Humidity Window
press the
MEMORY
button recalling:
•
Current temperature and humidity
•
Minimum temperature and humidity
•
Maximum temperature and humidity at the remote location.
Resetting Remote Temperature and Humidity Memory
In the
Temperature and Humidity Window
, press and hold
MEMORY
button to clear memory for
all channels.
Remote Sensor Status
The wave icon above the current channel display shows the connection status of the
corresponding remote sensor:
Icon Status
Searching for the signals from the remote sensor
Corresponding remote sensor signal received successfully
No signals received for over 15 minutes
All Remote Sensor Signals Search Activation
The main unit can be manually activated to search for the signals from all remote sensors.
Press and hold
DOWN
button for 5 seconds to enable the search.
Rain Window
The
main unit
records the total amount of the rainfall for the last hour, 24 hours, past day, past
week and the past month. The rainfall can be displayed in
inches
or
mm
.
The daily rainfall can be programmed to alarm you if the rainfall exceeds a pre-programmed limit.
Accessing Rain Window
From the main unit: Press
UP
or
DOWN
arrow button until the
RAIN
icon
on the display starts
flashing. From the remote control: Press .
Viewing Rain Statistics
In the
Rain Window
press either
SET
or
MEMORY
button to recall:
•
Current rainfall