25
25
format, hour and minutes
•
Press
SET
every time to confirm each selection and move to the next
MANUAL PROGRAMMING
•
In the Clock Window, press and hold
SET
button until the day of week
language abbreviation
“ENG”
will flash
•
Press the
UP
or
DOWN
selecting the day of the week in English,
German, French, Italian, Spanish or Dutch
•
Press
SET
to confirm selection
•
Select the code
USR
by pressing
UP
or
DOWN
•
Press
SET
to confirm selection and enter to the latitude and longitude
setting mode (the degrees of latitude will flash)
•
Press
UP
or
DOWN
to adjust the latitude (degrees, minutes and
direction). Press and hold either button for quick digits advance
•
Press
SET
to confirm the selection
•
Continue setting the longitude (degrees, minutes and direction) using
the same technique
•
Press
SET
to confirm the selection –
0:00 + tz”
will flash prompting to
enter the Time Zone setting mode (the Time Zone data is provided on
P.)
•
Set the Time Zone by pressing
UP
or
DOWN
to adjust the time in 30
min intervals. Press and hold either button for quick digits advance
•
Press
SET
to confirm selection –
DST no””
will flash prompting to set
the Daylight Saving Time Option
•
Press
UP
to enable and
DOWN
to disable the DST option
•
Press
SET
to confirm selection and the year digits will flash
•
Continue setting the year, month, day, calendar format (day/month or
month/day), time format (12 or 24 hours), local hour and minutes, using
26
the same technique
After programming is complete the display will return to the default Clock
Window.
Note
: Press and hold
SET
anytime during the setup to return to the default
Clock Window and all previous settings will be cancelled.
DIFFERENT CLOCK AND CALENDAR MODES
In the Clock Window press
SET
selecting either:
•
Hour and Minutes with the Day of the week
•
Hour and Minutes with the City Code
•
Hour and Minutes with the Seconds
•
Month with the day and a year
•
Hour and Minutes for UTC (Coordinated Universal Time)
ACTIVATING OR DEACTIVATING ALARMS
•
Press the
ALARM
to display the Weekday Alarm (
W
), Single Alarm (
S
)
or Ice Warning Alarm (
Pre-Al
) time. If these alarms are not set, the
abbreviation
OFF
will be displayed
•
To enable or disable any of these alarms, press
UP
or
DOWN
Note
: Press
SET
anytime during alarm selection mode to return to the default
clock display.
PROGRAMMING ALARMS
•
In the Clock and Alarm Mode, press the
ALARM
selecting the desired
alarm –
W
,
S
or
PRE-AL
•
Press and hold
ALARM
button until the hour digit will flash
•
Set the alarm hour using the
UP
or
DOWN
. Press and hold either
button for quick digit advance
