3
USE & OPERATION (CONTINUED)
EN
FUNCTION BUTTONS
POWER
Press the button to turn the unit on. The cooler will start automatically at medium speed. After a
few seconds the speed will switch to low. To turn the unit off, press the button again.
MODE (COOL / IONIZER*^)
You must add water before operating the unit. Press the MODE button to select COOL and IONIZER
modes.
Pressing the MODE button until COOL is illuminated on the control panel activates evaporative
cooling. The water pump will operate and you will feel the cooler air after the Honeycomb Cooling
Media is completely wet.
Pressing the MODE button until IONIZER is illuminated activates Ionizer. An Ionizer helps to
reduce particles in the air, thus promoting cleaner air quality.
Pressing the MODE button until both COOL and IONIZER are illuminated activates both
evaporative cooling and Ionizer together.
Pressing the MODE button again will deactivate both COOL and IONIZER lights on the control
panel, switching off both evaporative cooling and Ionizer function altogether.
SWING
Press the SWING button until is illuminated on the display. The louvers will
begin to move left to right automatically. You can manually adjust the louvers
to change vertical air flow.
SPEED
Press the SPEED button repeatedly to change the speed between
|
-
||
-
|||
.
* Applicable for models with Ionizer feature only.
^ Ionizer reduces particles in the air. This is not an air purifier.
Louver
Movement
