12
69-0819
display except MORNING by pushing the
CANCEL
PERIOD
key. To move to the next period while program-
ming, simply press the
PERIOD
key again.
COPYING ONE DAY’S PROGRAM TO ANOTHER DAY
You can copy one day’s program to any other day or
combination of days. The new program will replace any
program already set in the day selected.
1. If necessary, press and release
PERIOD
key to
enter the programming mode.
2. Press and hold
DAY
key until the day containing
the program to be copied shows in the display.
3. Press and release
COPY FROM
key. The day to
be copied will show, and the next day will flash, in the
display.
4. Press and release
COPY TO
key if you wish to
copy the program into the day that is flashing in the
display. Note that the
next day starts to flash.
5. Press and release
DAY
key if you do not wish to
copy into the day that is flashing. Note that the
next day
now starts to flash.
6. Press and release
COPY TO
key again to select
the day that is flashing, or the
DAY
key to bypass it.
7. Continue until all desired days are showing in the
display and are
not flashing.
8. Press and release
RUN PROGRAM
key to copy
the program into all the days you have selected.
9. Follow the procedure described above to program
any remaining days.
NOTE: The display will show 32
°
F, indicating the
thermostat is operating on backup batteries until the
thermostat is mounted on the subbase and the system
is powered.
COOLING PROGRAM
The program times are the same for both heating and
cooling. Only the cooling temperatures need to be
programmed if you have already programmed for heating.
To set times as you program the cooling temperatures,
use
AHEAD
and
BACK
keys. But if you change the times
for cooling, you are also changing them for heating.