manualshive.com logo in svg

Honeywell SPM Flex, Руководство пользователя, Страница: 46 / 77

Поделиться
Скачать
Honeywell SPM Flex Скачать руководство пользователя страница 46

46

SPM Flex Gas Detector

Configuration Manager

Access to options for up to five internal flash slots can be chosen from the 
Configuration Manager menu� Information can also be imported to or exported 
from the detector via the USB option�

Test menu

The detector’s optical system can be checked from the Optics Verification screen 
(using the verification card�) Alarms 1 and 2, maintenance faults, and instrument 
faults can be tested from the Simulate menu� The alarms and faults can also be 
reset from the Simulate menu� The Force Relays and Force 4-20 mA options are 
also available through the Test menu�

Power off

Select “Power off” to shut off the detector� Selecting this option has the same 
effect as pressing and holding the power button for 5 seconds�

Duty cycle

This function allows the user to extend the duration of the tape advance interval� 
This is useful in applications in which a background level of gas is expected in 
normal operation� This interval can be configured for up to seventeen minutes�  
When in monitor mode, if the detector reaches its maximum concentration for 
that window, it will hold and display a countdown informing that it is waiting for 
the duty cycle to expire�  
The Duty Cycle menu can be found at 

Main menu > Set up > Monitoring > Duty 

Cycle.

 

The detector does not monitor gas levels while the duty cycle is counting down�

CAUTION

!

Содержание SPM Flex














































































Отзывы:

Нет отзывов