Honeywell SmartDrive HVAC, Руководство по установке

Страница: 10 / 77

R
ECEIPT OF DELIVERY
Honeywell
• 8
2
2.2 Unpacking and lifting the drive
The weights of the drives vary greatly according to the size. You may need to use a piece of
special lifting equipment to move the converter from its package. Note the weights of each in-
dividual frame size in Table 4 below.
Table 4. Frame weights
If you decide to use a piece of lifting equipment see picture below for recommendations to lift
the drive.
2.2.1 Lifting frames MR8 and MR9
Figure 2. Lifting bigger frames
The drives have undergone scrupulous tests and quality checks at the factory before they are
delivered to the customer. However, after unpacking the product, check that no signs of trans-
port damages are to be found on the product and that the delivery is complete.
Frame
Nominal power
400V 3~ series
Nominal power
230V 3~ series
Weight [kg]
MR4 1.1 - 5.5 kW 0.55 - 3.0 kW 6.0
MR5 7.5 - 15.0 kW 4.0 - 7.5 kW 10.0
MR6 18.5 - 30.0 kW 11.0 - 15.0 kW 20.0
MR7 37.0 - 55.0 kW 18.5 - 30.0 kW 37.5
MR8 75.0 - 110 kW 37.0 - 55.0 kW 70.0
MR9 132 - 160 kW 75.0 - 90.0 kW 108.0
NOTE:
First detach the drive from the pallet it has been
bolted to.
NOTE:
Place the lifting hooks symmetrically in at least two
holes.The lifting device must be able to carry weight of the
drive.
NOTE:
The maximum allowed lifting angle is 45 degrees.